Improving The Mechanical Properties Of Gray Cast Iron By Controlling The Solidification Rate

Authors

  • Kh.Z. Adkhamov Namangan Engineering-Construction Institute
  • T.S. Khalimjonov Tashkent State Technical University
  • K.Kh. Abdullaev Namangan Engineering-Construction Institute
  • F.U. Odilov Andijan Institute of Economics and Construction
  • N.Kh. Tadjiev Tashkent State Technical University

Keywords:

Grey cast iron, induction furnace, melting

Abstract

This article aims to improve the mechanical properties of the ingot by controlling the cooling process of the ingot by sending air at a certain pressure in addition to the cooling rate during the cooling of gray cast iron melted in an induction furnace in a sand-clay mold

References

Khasanov J. et al. Development of technology for obtaining thin-walled details from gray

cast iron in sand-clay moulds //International Journal of Mechatronics and Applied Mechanics. –

– №. 18. – С. 199-209.

Saidmakhamadov N. et al. Improving the design of the lining of the ball mill used to

improve the quality of grinding //E3S Web of Conferences. – EDP Sciences, 2024. – Т. 525. – С.

Saidmakhamadov N. M., Abdullah T. Development of a micro-structured photonic crystal

fiber as a biological or chemical sensor based plasmonic application.: Development of a microstructured photonic crystal fiber as a biological or chemical sensor based plasmonic application. –

Nosir S. et al. Improvement of the Technology of Pouring Thin–Walled Gray Cast Iron

into a Sand–Clay Mold. – 2023.5. Nosir S. et al. Improvement of the Technology of Obtaining High–Chromium Wear–

Resistant White Cast Iron. – 2023.

Nosir S. et al. Technology to Increase the Hardness and Resistance of High–Chromium

White Cast Iron. – 2023.

Nosir S., Bokhodir K. Development of liquefaction technology 280X29NL to increase the

strength and brittleness of castings //International Conference on Reliable Systems Engineering. –

Cham : Springer International Publishing, 2022. – С. 105-115.

Nosir S. et al. Improvement of Technology of Liquefaction of Gray Cast Iron Alloy

//Global Scientific Review. – 2022. – Т. 6. – С. 19-28.

Nosir S., Tokhir K., Anvar T. Technology for Obtaining High Quality Castings from

Resistance White Cast Iron //Eurasian Journal of Engineering and Technology. – 2022. – Т. 5. –

С. 139-148.

Nosir S. et al. Cast iron liquefaction technology //editorial board. – 2022. – С. 812.

Nosir S. et al. Development of Technology for Production of Wear–Resistant Cast

Products //Middle European Scientific Bulletin. – 2022. – Т. 25. – С. 516-522.

Saidmakhamadov N., Abdullaev K., Khasanov J. Development of 280X29NL brand

resistance white cast iron liquefaction technology //Теория и практика современной науки. –

– №. 2 (80). – С. 3-8.

Nosir S. et al. Development of High Chromium White Cast Iron Liquefaction Technology

//Eurasian Journal of Engineering and Technology. – 2022. – Т. 4. – С. 123-127.

Nodir T. et al. Development of technology to increase resistance of high chromium cast

iron //The American Journal of Engineering and Technology. – 2021. – Т. 3. – №. 03. – С. 85-92.

Turakhodjaev N. et al. Development Of A New Brand Of Alloy Instead Of 280X29NL

Brand Spreadable Cast Alloy //The American Journal of Engineering and Technology. – 2021. – Т.

– №. 03. – С. 36-43.

Turakhodjaev N. D. et al. Analysis Of The Effect Of Chromium Content On The

Mechanical Properties Of White Cast Iron //The American Journal of Engineering and

Technology. – 2021. – Т. 3. – №. 01. – С. 65-76.

Nodir T. et al. Development of 280X29Nl alloy liquefaction technology to increase the

hardness and corrosion resistance of cast products //International Journal of Mechatronics and

Applied Mechanics. – 2021. – №. 10. – С. 154-159.

Djahongirovich T. N., Muysinaliyevich S. N. Important features of casting systems when

casting alloy cast irons in sand-clay molds //ACADEMICIA: An International Multidisciplinary

Research Journal. – 2020. – Т. 10. – №. 5. – С. 1573-1580.

Turakhodjaev N. D. et al. Analysis of defects in white cast iron //Theoretical & Applied

Science. – 2020. – №. 6. – С. 675-682.

Valida B. et al. Improvement of the Technology of Production of Quality Semi–Finished

Product Products from Steel Alloy. – 2023.

Downloads

Published

2025-02-06

How to Cite

Kh.Z. Adkhamov, T.S. Khalimjonov, K.Kh. Abdullaev, F.U. Odilov, & N.Kh. Tadjiev. (2025). Improving The Mechanical Properties Of Gray Cast Iron By Controlling The Solidification Rate. Czech Journal of Multidisciplinary Innovations, 38, 1–5. Retrieved from https://peerianjournal.com/index.php/czjmi/article/view/1031

Issue

Vol. 38 (2025): CJZMI

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format
  2. Adapt — remix, transform, and build upon the material
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. NonCommercial — You may not use the material for commercial purposes .
  3. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits