Voltage drops studies for the operation of the microprocessor and microcircuits

Authors

  • Akhmedov Alimjon Mahmudovich Andijan Machine-Building Institute", Andijan, Republic of Uzbekistan

Keywords:

Power supply, shutter lag transistors, power fluctuations, Vdd-drain plus

Abstract

The article explores the possibility of using flexible circuits in rectifier systems. An optimal topology of the power converter is proposed, fully using the functionality of the microcircuits. The proposed solution generates a relatively smooth DC output with less high frequency harmonic content, avoiding the high frequency harmonic problems found in rectifiers and will play a significant role in improving profitability and reliability in low to medium range power rectifier systems.

References

Madhavan Svaminathan and A.Ege EnginPower Integrity Modeling and design for semiconductors and systems. Prentyce Hall. 2008.

А. Мухтароглу, Г. Тейлор и Т. Рахала-Араби, «Chip voltage drop detector for analog power supply noise detection», IEEE Journal of Solid-State Circuit, vol. 39, © IEEE, 2004

Mike Peng Li. Jitter,Noise and signal integrity at high speed. © IEEE 2008

Ahmadov A. "Andijan Machine-Building Institute", Andijan Republic of Uzbekistan "Studies of the use of igct thyristor"

Tom Granberg. Handbook of digital techniques for high speed design. 2004

Downloads

Published

2022-03-31

How to Cite

Akhmedov Alimjon Mahmudovich. (2022). Voltage drops studies for the operation of the microprocessor and microcircuits. Czech Journal of Multidisciplinary Innovations, 3, 33–38. Retrieved from https://peerianjournal.com/index.php/czjmi/article/view/47

Issue

Vol. 3 (2022): CZJMI

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format
  2. Adapt — remix, transform, and build upon the material
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. NonCommercial — You may not use the material for commercial purposes .
  3. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits