Verification of the effect of adding nano-silicon oxide on the quality of friction stirs welding of AC-51300 aluminum Nano Composite
Main Article Content
Abstract
This work aims to study the addition of different proportions of silicon oxide to aluminum alloys that are difficult to weld, and to show the results obtained to increase the strength and quality of the weld joint using friction stirs welding
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Mohammed, H.J., Mahmood, I.A. and Al-Jaafari, M.A., 2018. An Estimation Study on Fatigue transition Life of Nanocomposites Reinforced by AL2O3. Association of Arab Universities Journal of Engineering Sciences, 25(4), pp.185-202.
Al-Jaafari, M.A., 2021, June. Study the Effects of Titanium Dioxide nano particles reinforcement on the mechanical properties of Aluminum Alloys composite. In IOP Conference Series: Materials Science and Engineering (Vol. 1105, No. 1, p. 012062). IOP Publishing.
Al-Jaafari, M.A., 2021. Heat Treatments Effects on the Fatigue Behaviors of Aluminum Nano-Composite Alloys. Iraqi Journal of Science, pp.4397-4405.
Al-Alkawi Hussain Jasim Mohammed, Abthal Abd Al-Rasiaq & Mamoon A. A. Al-Jaafari, 2017 , “Effect of Cryogenic Treatments on Mechanical Properties of 7075 Aluminum Alloy Matrix/Al203 Particles Reinforced Composites”. International Journal of Engineering Research and Modern Education.vol.2, no. 1,pp.143-149.
Al-Jafaari, M., 2017. Cryogenic treatment effect on fatigue behavior of 2024 and 7075 aluminum alloys with nano alumina composite material [Ph. D thesis]. University of Technology. Mechanical Engineering Department.
Ibraheem, I.F. and Al-Jaafari, M.A., 2021, June. Evaluation of photovoltaic potential application in urban environments using GIS-based method: the particular case of Baghdad/Iraq. In IOP Conference Series: Materials Science and Engineering (Vol. 1105, No. 1, p. 012083). IOP Publishing.
Al-Jaafari, M.A., 2022. A comparative study using silicon carbide and zirconium dioxide nano material’s to improve the mechanical properties of 6261AA. Periodicals of Engineering and Natural Sciences (PEN), 10(3), pp.323-333.
Al-Jaafari, M.A. and Ibraheem, I.F., 2022. Determination the groundwater effects on corrosion in Nano composite material Silicon-Carbide reinforced aluminum alloys in Baghdad Iraq. Texas Journal of Engineering and Technology, 10, pp.33-39.
Verma, S., Kumar, V., Kumar, R. and Sidhu, R.S., 2021. Exploring the application domain of friction stir welding in aluminum and other alloys. Materials Today: Proceedings.
Wang, G.Q., Zhao, Y.H. and Tang, Y.Y., 2020. Research progress of bobbin tool friction stir welding of aluminum alloys: A review. Acta Metallurgica Sinica (English Letters), 33(1), pp.13-29.
Cabibbo, M., Forcellese, A., Santecchia, E., Paoletti, C., Spigarelli, S. and Simoncini, M., 2020. New approaches to friction stir welding of aluminum light-alloys. Metals, 10(2), p.233.
Yu, P., Wu, C. and Shi, L., 2021. Analysis and characterization of dynamic recrystallization and grain structure evolution in friction stir welding of aluminum plates. Acta Materialia, 207, p.116692.
Tanaka, T., Nezu, M., Uchida, S. and Hirata, T., 2020. Mechanism of intermetallic compound formation during the dissimilar friction stir welding of aluminum and steel. Journal of Materials Science, 55(7), pp.3064-3072.
Fathi, J., Ebrahimzadeh, P., Farasati, R. and Teimouri, R., 2019. Friction stir welding of aluminum 6061-T6 in presence of watercooling: Analyzing mechanical properties and residual stress distribution. International Journal of Lightweight Materials and Manufacture, 2(2), pp.107-115.
Su, H. and Wu, C., 2021. Numerical simulation for the optimization of polygonal pin profiles in friction stir welding of aluminum. Acta Metallurgica Sinica (English Letters), 34(8), pp.1065-1078.
Khajeh, R., Jafarian, H.R., Seyedein, S.H., Jabraeili, R., Eivani, A.R., Park, N., Kim, Y. and Heidarzadeh, A., 2021. Microstructure, mechanical and electrical properties of dissimilar friction stir welded 2024 aluminum alloy and copper joints. Journal of Materials Research and Technology, 14, pp.1945-1957.
Maji, P., Nath, R.K., Karmakar, R., Paul, P., Meitei, R.B. and Ghosh, S.K., 2021. Effect of post processing heat treatment on friction stir welded/processed aluminum based alloys and composites. CIRP Journal of Manufacturing Science and Technology, 35, pp.96-105.
Sun, Y., Liu, W., Li, Y., Gong, W. and Ju, C., 2022. The Influence of Tool Shape on Plastic Metal Flow, Microstructure and Properties of Friction Stir Welded 2024 Aluminum Alloy Joints. Metals, 12(3), p.408.
https://www.makeitfrom.com/material-properties/EN-AC-51300-51300-F-AIMg5-Cast-Aluminum
https://nanografi.com/blog/sio2-nano-powder-properties-applications.
Balogun, O.A., Akinwande, A.A., Ogunsanya, O.A., Ademati, A.O., Adediran, A.A., Erinle, T.J. and Akinlabi, E.T., 2022. Central composite design and optimization of selected stir casting parameters on flexural strength and fracture toughness mTiO2p/Al 7075 composites. Materials Today: Proceedings.
Al-Jaafari, M.A., 2021. Study the effects of different size of Al2O3 nanoparticles on 6066AA and 7005AA composites on mechanical properties. Materials Today: Proceedings, 42, pp.2909-2913.
Al-Jaafari, M.A., 2022. Investigated the effects of Different casting methods on the mechanical properties of 2014 Aluminum Alloy reinforced by Alumina. Eurasian Journal of Engineering and Technology, 8, pp.43-50.
Mamoon, A. and Al-Jaafari, A., 2020, June. Fatigue behavior of aluminum SIC Nano composites material with different reinforcement ratio. In IOP Conference Series: Materials Science and Engineering (Vol. 870, No. 1, p. 012159). IOP Publishing.
Mohammed, A.A.H.J., Abd Al-Rasiaq, A. and Al-Jaafari, M.A., 2018. Studying the effect of Different wt% AL2O3 Nanoparticles of 2024Al Alloy/AL2O3 Composites on Mechanical Properties. Al-Khwarizmi Engineering Journal, 14(2), pp.147-153.
Al-Rasiaq, A.A., 2017. Mechanical Properties of 7075 Aluminum Alloy Matrix/Al2O3 Particles Reinforced Composites. Engineering and Technology Journal, 35(3 Part A).
Mahoney, M.W. and Mishra, R.S., 2007. Friction stir welding and processing. ASM International.
Adediran, A.A., Akinwande, A.A., Balogun, O.A., Adesina, O.S., Olayanju, A. and Mojisola, T., 2021. Evaluation of the properties of Al-6061 alloy reinforced with particulate waste glass. Scientific African, 12, p.e00812.