Effects of Different Proportions of Aluminum oxide Nanoparticles for 6063 AA Nano-Composite on Mechanical Properties

Main Article Content

Mamoon A A Al-Jaafari

Abstract

This This work aims at an applied study of the process of adding different percentages of aluminum oxide to aluminum alloys that are widely used and the effect of these additives on a major set of physical properties, and the results obtained showed an increase in the strength and quality of samples reinforced with nano-materials compared to the base material

Article Details

How to Cite
Mamoon A A Al-Jaafari. (2023). Effects of Different Proportions of Aluminum oxide Nanoparticles for 6063 AA Nano-Composite on Mechanical Properties. The Peerian Journal, 16, 9–18. Retrieved from https://peerianjournal.com/index.php/tpj/article/view/501
Section
Articles

References

Mohammed, H.J., Mahmood, I.A. and Al-Jaafari, M.A., 2018. An Estimation Study on Fatigue transition Life of Nanocomposites Reinforced by AL2O3. Association of Arab Universities Journal of Engineering Sciences, 25(4), pp.185-202.

Al-Jaafari, M.A., 2021, June. Study the Effects of Titanium Dioxide nano particles reinforcement on the mechanical properties of Aluminum Alloys composite. In IOP Conference Series: Materials Science and Engineering (Vol. 1105, No. 1, p. 012062). IOP Publishing.Al-Jaafari, M.A., 2021. Heat Treatments Effects on the Fatigue Behaviors of Aluminum Nano- Composite Alloys. Iraqi Journal of Science, pp.4397-4405.

Al-Alkawi Hussain Jasim Mohammed, Abthal Abd Al-Rasiaq & Mamoon A. A. Al- Jaafari, 2017 , “Effect of Cryogenic Treatments on Mechanical Properties of 7075 Aluminum Alloy Matrix/Al203 Particles Reinforced Composites”. International Journal of Engineering Research and Modern Education.vol.2, no. 1,pp.143-149.

Al-Jafaari, M., 2017. Cryogenic treatment effect on fatigue behavior of 2024 and 7075 aluminum alloys with nano alumina composite material [Ph. D thesis]. University of Technology. Mechanical Engineering Department.

Ibraheem, I.F. and Al-Jaafari, M.A., 2021, June. Evaluation of photovoltaic potential application in urban environments using GIS-based method: the particular case of Baghdad/Iraq. In IOP Conference Series: Materials Science and Engineering (Vol. 1105, No. 1, p. 012083). IOP Publishing.

Al-Jaafari, M.A., 2022. A comparative study using silicon carbide and zirconium dioxide nano material’s to improve the mechanical properties of 6261AA. Periodicals of Engineering and Natural Sciences (PEN), 10(3), pp.323-333.

Al-Jaafari, M.A. and Ibraheem, I.F., 2022. Determination the groundwater effects on corrosion in Nano composite material Silicon-Carbide reinforced aluminum alloys in Baghdad Iraq. Texas Journal of Engineering and Technology, 10, pp.33-39.

Kelly, C.N., Morton, J.B. and Cumming, J.R., 2005. Variation in aluminum resistance among arbuscular mycorrhizal fungi. Mycorrhiza, 15, pp.193-201.

Chen, X.W., Liu, Y., Jin, X.Q., Sun, Y.Y., Gu, S.L., Fu, L. and Li, J.Q., 2016. Development and Kilogram-Scale Synthesis of a D2/5-HT2A Receptor Dual Antagonist (±)-SIPI 6360. Organic Process Research & Development, 20(9), pp.1662-1667.

Qi, X., Liu, M., Zhang, F. and Chen, Z., 2009. Synthesis and properties of poly (sodium acrylate‐co‐2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid)/attapulgite as a salt‐resistant superabsorbent composite. Polymer Engineering & Science, 49(1), pp.182-188..

Selvakumar, G., Sornalatha, G., Sarkar, S. and Mitra, S., 2014. Experimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy. Transactions of Nonferrous Metals Society of China, 24(2), pp.373-379.

Tanaka, T., Nezu, M., Uchida, S. and Hirata, T., 2020. Mechanism of intermetallic compound formation during the dissimilar friction stir welding of aluminum and steel. Journal of Materials Science, 55(7), pp.3064-3072.

Orłowska, M., Pixner, F., Hütter, A., Enzinger, N., Olejnik, L. and Lewandowska, M., 2022. Manufacturing of coarse and ultrafine-grained aluminum matrix composites reinforced with Al2O3 nanoparticles via friction stir processing. Journal of Manufacturing Processes, 80, pp.359-373..

Yolshina, L.A., Kvashnichev, A.G., Vichuzhanin, D.I. and Smirnova, E.O., 2022. Mechanical and Thermal Properties of Aluminum Matrix Composites Reinforced by In Situ Al2O3 Nanoparticles Fabricated via Direct Chemical Reaction in Molten Salts. Applied Sciences, 12(17), p.8907.

Chen, J., Jiang, X., Lyu, L., Li, Y., Christian, P., Sun, H. and Shu, R., 2022. Microstructure and properties of nano-C and in-situ Al2O3 reinforced aluminum matrix composites processed by high-pressure torsion. Composite Interfaces, 29(5), pp.579-595.

Maji, P., Nath, R.K., Karmakar, R., Paul, P., Meitei, R.B. and Ghosh, S.K., 2021. Effect of post processing heat treatment on friction stir welded/processed aluminum based alloys and composites. CIRP Journal of Manufacturing Science and Technology, 35, pp.96-105.

https://www.makeitfrom.com/material-properties/EN-AC-51300-51300-F-AIMg5-Cast- Aluminum

https://nanografi.com/blog/sio2-nano-powder-properties-applications.

Al-Jaafari, M.A., 2021. Study the effects of different size of Al2O3 nanoparticles on 6066AA and 7005AA composites on mechanical properties. Materials Today: Proceedings, 42, pp.2909-2913.

Mohammed, A.A.H.J., Abd Al-Rasiaq, A. and Al-Jaafari, M.A., 2018. Studying the effect of Different wt% AL2O3 Nanoparticles of 2024Al Alloy/AL2O3 Composites on Mechanical Properties. Al-Khwarizmi Engineering Journal, 14(2), pp.147-153

Al-Jaafari, M.A., 2022. Investigated the effects of Different casting methods on the mechanical properties of 2014 Aluminum Alloy reinforced by Alumina. Eurasian Journal of Engineering and Technology, 8, pp.43-50.

Al-Rasiaq, A.A., 2017. Mechanical Properties of 7075 Aluminum Alloy Matrix/Al2O3 Particles Reinforced Composites. Engineering and Technology Journal, 35(3 Part A).

Mamoon, A. and Al-Jaafari, A., 2020, June. Fatigue behavior of aluminum SIC Nano composites material with different reinforcement ratio. In IOP Conference Series: Materials Science and Engineering (Vol. 870, No. 1, p. 012159). IOP Publishing.

Balogun, O.A., Akinwande, A.A., Ogunsanya, O.A., Ademati, A.O., Adediran, A.A., Erinle, T.J. and Akinlabi, E.T., 2022. Central composite design and optimization of selected stir casting parameters on flexural strength and fracture toughness mTiO2p/Al 7075 composites. Materials Today: Proceedings.

Mahoney, M.W. and Mishra, R.S., 2007. Friction stir welding and processing. ASM International.

Mohammed, A.A.H.J., Abd Al-Rasiaq, A. and Al-Jaafari, M.A., 2017. Effect of Cryogenic Treatments on Mechanical Properties of 7075 Aluminum Alloy Matrix/Al203 Particles Reinforced Composites. International Journal of Engineering Research and Modern Education, 2(1), pp.143-149.

Mohammed, T., Al-Jaafari, M.A. and Atea, I.A., 2022. Aluminum Foams as Metal/Ceramic Composites and their Morphological, Thermo-physical and Mechanical Properties: A Review Study. Journal of Industrial Mechanics (e-ISSN: 2582-1067), 7(3), pp.8-23.

Mamoon A.A. Al-Jaafari, Haider Ali Hussein, Abdulaziz Saud Khider, Raad M. Fenjan and Nadhim M. Faleh. 2023, "On dynamic deflection analysis of sandwich beams under thermal and pulse loads", Steel and Composite Structures, An International Journal, vol.46, no.2 pp.195-202.

Al-Jaafari, M.A., 2022. Verification of the effect of adding nano-silicon oxide on the quality of friction stirs welding of AC-51300 aluminum Nano Composite. The Peerian Journal, 9, pp.7- 15.