Technology to prevent Methane or coal dust explosions in the mine
Main Article Content
Abstract
Preventing the propagation of methane or coal dust explosions through the use of active explosion-suppression systems remains one of the most underutilised explosion controls in underground coal mines. As part of the effort to develop better technologies to safeguard mines, the use of active barrier systems was investigated at Kloppersbos in South. From the tests conducted, it can be concluded that the ExploSpot System was successful in stopping flame propagation for both methane and methane and coal dust hybrid explosions when ammonium phosphate powder was used as the suppression material. The use of this barrier will provide coal mine management with an additional explosion control close to the point of ignition and may find application within longwall faces further protecting mines against the risk of an explosion propagating throughout a mine
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Cashdollar KL, Hertzberg M (1989) Laboratory study of rock dust inerting requirements: effect of coal volatility, particle size and methane addition. Proceedings of the 23rd International Conference of Safety in Mines Research Institutes, Washington DC: 965–974
Cook P (1993) The inhibition of coal-dust explosions with stone dust in a large-scale explosion gallery. Report ENER 93-001, CSIR Division of Energy Technology du Plessis JJL (2001) Development and evaluation of the bagged stone dust barrier.
Docor’s Thesis: University of Witwatersrand du Plessis JJL, Spa¨th H (2002) Triggered barrier system performance in a 200-m test gallery at Kloppersbos. Paper presented at the 9th North American Ventilation Congress, Kingston, Ontario, Canada, 2002
Du Plessis JJL, Spa¨th H (2014) Active barrier performance preventing methane explosion propagation. 14th Coal Operators’ Conference: 350–359 du Plessis JJL, Vassard PS (1995) Assessment of dispersed barriers. Preliminary Research Report, CSIR Division of Mining Technology
Du Plessis JJL, Brandt MP, Vassard PS (1995) Assessment of explosion barriers. SIMRAC Research Report, COL 010 European Standard EN 14591-4 (2007) Explosion Prevention and Protection in Underground Mines Protective Systems Part 4: Automatic Extinguishing Systems for Road Headers
International Standard, IEC 60079-11, 1999: Intrinsic Safety, IEC 60079-0, 2005: General Requirements, IEC 60079-0, 2004: Hazardous Locations and IEC 60079-1, 2004: Flameproof enclosures ‘d’
Knoetze TP, Kessler IIM, Brandt MP (1993) The explosibility of South African coals as determined in the 40–litre explosion vessel. J SAIMM 93(8):203–206